FAIL (the browser should render some flash content, not this).
  Home About us Products Contact us   Manufacturer & Exporters of :  H.S.S. Ground Thread Taps.  ||  All Type of Milling Cutters.  ||  H.S.S. Tool Bits.  ||  lenco Chasers.  ||  Machine Tools Accessories.  
  Wellcut Tools (India) Pvt. Ltd.  
Hydraulic Thread Rolling Machines
 
     
Linco Bolt Thread Machine Bed Type
Cap.: 3/8 to 1. 1/2"
 
Pillar Type Pipe and Bolt Threading Machines
Cap.: 1/2 to 2.1/2
Threading Capacity : 600mm
Hydraulic Thread Rolling Machines
Hydraulic Thread Rolling Machines
Thread Rolls


  Main Features

  • Powerful constructions permits deep forming of thread, warms serrations khurls.

  • Rigidity & simplicity : Grade-1 caste hardened and duly scrapped slide also the easy adjustment of machines as well as tooling enables an unskilled laborer to operate machine.

  • Machine is very much suitable for mass production and best surface finishes.

Specifications
 
Max. Pitch can be rolled 2.5 3 3.5 4 5
Max. Dia can be rolled infeed 25 25 40 50 50
Through Feed 12 16 25 30 36
Max Rolling Length infeed 80 80 125 150 180
Through Feed indefinite indefinite indefinite indefinite indefinite
Max. Outer Dia. T Rolls 120 160 180 200 200
Spindle Dia (Bore Dia) 40 54 54 69.85 69.85
Max. Width T. Rolls 80 80 125 150 182
Maximum Rolling Force 8 tons 8 tons 12 tons 15 tons 24 tons
 
For Roll Spindles 3 HP
1440rpm
3 HP
1440rpm
5 HP
1440rpm
7.5 HP
1440rpm
10HP
1440rpm
 
For Hyd. Pump 2 HP
1440rpm
3 HP
1440rpm
3 HP
1440rpm
5 HP
1440rpm
5 HP
1440rpm
 
For Coolant Pump 0.25 HP
3000rpm
0.25 HP
3000rpm
0.25 HP
3000rpm
0.25 HP
3000rpm
0.25 HP
3000rpm
  • Machines are also available as per your specific requirements.
  • The Maximum values specified above can not be always acheved simultaneously.
  • EXTRA ACCESSORIES : All kind of thread rollers, automatic loader for mass production and other special equipment on request.
  • All the specifications given above liable to change without notice.

Thread Rolls
These thread rolls are used on thread rolling machine. These rolls comes in set of two & three pieces manufactured from D2,D3 & M2 Material to suit any type of machine. For any specification of thread such as ISO Metric Din Whiteworhth America, Trapozodical, Acme etc.


Top

Copyrights © 2003 Wellcut Tools (India) Pvt. Ltd. All Rights Reserved
Site designed and developed by Gravity Infosys